|
We
can offer the Iron Ore 62% Fe of Loei province, Thailand North
Eastern origin for serious inquiries only.
Detailed
Product Description
Iron
ores are minerals from which metallic iron is extracted.
Most
important use of iron is in the blast furnace for the production of
pig iron. It is used in the furnace in the form of sinters and
pellets as also lumpy ore. It is also consumed in the open health furnaces.
IRON
ORE HANDLING
The
design of the processing circuit is designed to feature a jaw
crusher equipped with a rock-breaker followed by a two stage crushing
and screening operation with horizontal washing screen to produce
both lump and fines 0-50 mm size or as client's request.
Capacity
at 1,000 Mt per day and plan for 4,000 mt
Sufficient
stockpiles of ore will be maintained at the processing facilities to
allow for uninterrupted trucking/barging to Ayutthaya/Sriracha
port. More information: Iron
Ore Plant Flow Chart
Specifications;
Iron
as Fe: 62 % min : Volumatic test method
Sulfur
as S: 0.02%-0.08% max :
Phosphorus
as P: 0.02%-0.10% max : Based on ASTM E278-01
Silica
as SiO2: 2% to 5.0% max : Gravimatric test method
Aluminum
as Al2O3: 0.98%-3.5% max : ICP test method
Specific
gravity from 4.0 to 4.5.
Moisture
content: Humidity at 105 deg.c on received basis 8%, Rainy season Max.10%.
More
information: Iron
Ores Chemical Analysis
Sizes:
Fine and Lump
Fines
are defined as iron ore with the majority of Individual particles
measuring less than 10 millimeters diameter. Conversely, lump
is iron ore Majority of individual particles measuring more than 10
Millimeters diameter. Iron ore lumps varies from + 10 mm to + 75 mm.
More
information: Iron
ores size control
Fe
Content: Iron of as high-grade as possible is required because
an increased of 1% Fe in the burden increased the productivity by 2%
and decreased the coke rate by 3%. In the Dee Laa Mining, the range
of the Fe content in iron ore lumps is 60.2% to 66.5%.
Silica:
1.5% decreased of silica causes reduction in the slag volume of 65kg
per ton of pig iron. Increase of 100-kg slag per tonne of pig iron
raised fuel consumption by 40 kg of coke per tonne of pig iron. In
the Thailand Plants, the range of silica in iron ore lumps varies
from 2.6% to 5.0% (max.).
Alumina:
If the ore is high in alumina, the fluidity of slag is affected.
It should not also be too low. In the Indian Plants, alumina content
in the ore varies from 3% to 3.5% Generally.
Phosphorus
should not exceed 0.10%
DISTANCE
ADVANTAGE:
The
closest distance to China, Korea and Japan than other iron ore
deposits, the transportation of the iron ore to China and Japan
requires shorter time than other exporters. (Approximately 2,600
Nautical miles, India approximately 4,000 Nautical miles, Australia
approximately 3,600 nautical miles, and Brazil approximately 10,000
nautical miles to China)
|
Laa Importer
and Exporter
